Why is my Maytag washer not draining or spinning?
A top load Maytag washer not draining may have a defective lid switch assembly. On top-loading washers, draining and spinning will only occur if the lid is properly closed and activates the switch. Try depressing the lid switch with your finger to see if the machine drains and spins.
How do you diagnose a washing machine problem?
Washer Troubleshooting Guide
- Check that the washer is plugged in securely.
- Check the circuit breaker or fuse box.
- Test the outlet for current.
- Check that the water supply valves are turned on.
- Inspect the filter screens.
- Test for overheating.
- Test the water level switch.
- Test the timer control.
What do you do when your Maytag washer won’t start?
If your Maytag washing machine isn’t starting, verify that the power cord is connected to a live outlet. Test the outlet with another three-prong appliance. If the outlet is working, plug the power cord securely into the outlet. Do not use an extension cord or adapter.
What are the codes for a Maytag washer?
Error Codes in my Maytag Front Load Washer
| Error Code | Error |
|---|---|
| Sud or Sd | There are too many suds in the washing machine. |
| F5 E2 | The door is not locking properly. |
| F7 E1 | Indicates a motor speed sensing error, |
| F8 E1 or LO FL | The washer is sensing a low flow of water. |
Is there a reset button on Maytag washer?
Press and hold the Start/Pause button for 3 seconds. All indicator lights should be off at this point. Reset the Washer: To reset (clear) the washer, rotate the Cycle Selector Knob counter-clockwise (left) to clear any sequence.
How do you force drain a Maytag washer?
Here’s how to manually drain water from a Maytag washing machine:
- Pull the washer away from the wall and turn off its power and water connections.
- Scoop out any remaining water in the washer drum.
- Unhook the drain hose from the wall or sink drain and empty residual water into a bucket.
What are the common problems in washing machine?
7 Common problems with washing machine
- Washing machine not starting.
- Washing machine is noisy.
- Excessive vibrations during operation.
- Washing machine making noise when draining or not draining at all.
- Washing machine over-filling or under-filling.
- Washing machine not spinning.
- Water leaking from soap drawer.
