Why is my LitterMaid not working?
Check to make sure litter in the tray is just below “Fill Line” and that the entire area of the litter tray is clear of blockages. Use the LitterMaid scoop & rake cleaner to clear away blockages and measure the level of litter in the center of the unit. The Fill Line will not be visible if tray is overfilled.
Where is the reset button on LitterMaid litter box?
After resetting the power, if the box won’t run a cycle or stops in the middle of a cycle, unplug the unit. Locate the reset buttons at the end of the track near the waste receptacle. Some models have one button on one side, while others have one on each side.
What does the reset button do on the Litter-Robot?
If you press Reset while the unit is cycling, it will pause the cycle; simply press Cycle to restart the cycle or Reset to abort the cycle and return the Globe to the Home position.
How do you adjust a cat litter sensor?
Adjust your cat sensor by pressing the Reset button. Test CATS by pressing on the globe just above the entrance in a forward and downward motion. The red light should engage. If the red light does not turn on after applying pressure, check your unit placement (below).
Do maids clean litter boxes?
For a small fee, Spotless Pet Maids will come to your home and change your dirty litter, clean and sanitize the litter box and replenish the litter box with fresh litter. On our first visit, just leave your dirty litter box outside of your garage and a technician will leave you with a clean litter box.
Can you use regular litter in LitterMaid?
The LitterMaid’s raking design is compatible with virtually any type of litter and, at just under $80, it’s one of the cheapest automatic litter boxes on the market. Its price and versatility make it an accessible introduction for those who want to try a self-cleaning box for the first time.
Why does my Litter-Robot keep saying it’s full?
Debris may cause the DFI to indicate a full drawer regardless of the waste in the drawer. Once you are done cleaning your unit, let it dry fully and then reassemble it. If it is not dry, the litter will clump prematurely and may get clogged in the ports or litter pocket.
How do you manually cycle a Litter-Robot?
Press and Release: Pressing the Cycle Button starts the Litter-Robot cleaning cycle. In order to pause the cycle, press any button on the Control Panel during the Clean Cycle. Press Cycle once again to resume the cleaning cycle.
How do you reset a cat’s sensor?
To reset the Cat Sensor, press Reset when the unit is at the Home position and the control panel displays a solid blue light. Press the Reset button firmly and quickly, then watch for the blue light to flash to confirm you have successfully reset the Cat Sensor.
How often should I Reset my LitterMaid motor?
Push the reset buttons, one on each side of the tray, seven times. The white reset buttons within the waste receptacle need to be pressed several times before they completely clear any technical problems within the motor. Your Littermaid might not reset properly if you do not push the buttons enough times.
How can I troubleshoot my LitterMaid litter box?
You can help to prevent problems with your Littermaid litter box by emptying the waste container regularly, using good-quality clumping litter and checking the batteries occasionally. You can also troubleshoot simple problems with your litter box such as incomplete cleaning, failure to run and blinking light indicators.
What’s the reset button on a litter tray?
An automatic rake moves across the litter tray 10 minutes after the cat is detected leaving, sweeping away any droppings into a receptacle. Littermaid trays have a hidden reset button inside the mechanism which helps restart the motor if it stops working.
Why does my rake keep getting stuck in the litter box?
If the light blinks constantly and slowly, the rake is stuck. Check the waste receptacle and, if it’s full, make sure to empty it to keep the rake from getting jammed. Make sure the teeth on the rake are clean and don’t have litter sticking to them.If the light is blinking quickly, the batteries need to be replaced.
How to troubleshoot the reset button on a LitterMaid?
Littermaid trays have a hidden reset button inside the mechanism which helps restart the motor if it stops working. There are several troubleshooting steps you can try if you have followed the reset procedure using the reset button but the tray still isn’t working. Push the reset buttons, one on each side of the tray, seven times.
How often do you need to turn on LitterMaid?
(Press the ON/OFF button “OFF.”) Manually activate the LitterMaid® unit 2 to 3 times a day for the first 2 to 3 days, to let your cat get used to going into the LitterMaid® unit before you set it to clean automatically. As soon as your cat is acclimated to the LitterMaid® unit set it to clean automatically.
Where to find model number on LitterMaid litter box?
The model number is on a sticker and the date code is stamped into the underside of the battery compartment cover. Find a location for your LitterMaid® Litter Box in a clean, dry place. Note: For optimal performance, do not place your LitterMaid® Litter Box in moist environment or in direct sunlight.
When to turn off the automatic litter box?
(Cats prefer to use a clean box, and the LitterMaid® will always be clean.) If your cat is shy, do not operate the LitterMaid® unit automatically for 2 to 3 days. (Press the ON/OFF button “OFF.”)
