What size driver do I need for LED lights?

We recommend choosing a driver with a wattage capability at least 10% higher than the wattage the LED tape requires to ensure a longer lifespan. For example, 5m of 6w LED tape requires 30 watts. We would recommend using a driver with an output capability of 33 watts or more to power this tape.

Do you need a driver for LED lights?

Every LED light fixture requires an LED driver to power them. There are two different types of devices: internal drivers and external drivers. Internal drivers are normally found in household light bulbs. These are your standard incandescent and CFL light bulb replacements with screw-in or plug-in capabilities.

Can I use a driver instead of a transformer?

Depending on the specifications of your LED light strip or lighting setup, and LED driver or electronic transformer may be used. But, LED drivers are the preferred choice for ensuring optimum dimmability and extended lifespan of LEDs. Moreover, newer electronic transformers also allow for TRIAC dimming.

Can a LED driver be used as a power supply?

Can an LED driver be used as a power supply? Yes, LED drivers are actually very good for power supply use, and most CCTV power supplies use one to power its circuit board for other cameras, LED supplies are limited in Amperage typically less than 2Amp or 2000mA.

What is a 12v LED driver?

12v LED Drivers. 12v LED Drivers From 3W To 200W Range. A range a constant voltage 12 volt DC drivers purpose built for use with LEDs. These 12v LED drivers are high quality, have long life and are compatible with a wide range of LEDs including LED Tape/ LED Strip.

Can I use a transformer for LED lights?

All mains powered LED bulbs require a transformer. Depending on the bulb type, the transformer/driver may be built in to the bulb casing or may be located externally. The purpose of the transformer is to reduce mains voltage (240V) to the desired level relative to the bulb being powered (e.g. 12V or 24V).