What is the default OSPF seed metric for routes sourced from BGP?
20
Set a default metric for all routing protocols being redistributed into a specific routing protocol. Set a metric as part of the redistribute command….Route Redistribution – Part 1.
| Routing Protocol | Default Seed Metric |
|---|---|
| OSPF | 20 (or 1 when redistributing BGP routes) |
| BGP | Uses the IGP metric value |
How redistribute BGP route to OSPF?
Use command “bgp redistribute-internal” under the BGP process on the redistributing router. In the scenario depicted here, router R1 and R2 are running IBGP and router R2/R3 running OSPF Area 0. R1 is advertising two routes (1.1. 1.1 /32 and 172.16.
What is the default seed metric when we redistribute RIP into OSPF?
OSPF has a default seed metric of 20 and a default route type of E2. Exception: BGP routes redistributed into OSPF are given a seed metric of 1. The link state protocol ISIS has a default seed metric of zero, but it does allow a route to be redistributed into an ISIS domain without a defined seed metric.
What is Eigrp default metric?
The default metric (weights) is a catch all – meaning the value you specify here is the default for the entire eigrp routing process. Ospf routes redistributed into eigrp specified with a specific metric will inherit those values upon redistribution.
What is seed metric in OSPF?
The seed metric is a metric and so once the routing update leaves the redistributing router for the next router this is a metric and so it will be incremented as needed. For OSPF, redistributed routes are considered E2 routes and so their metric is not incremented.
What is BGP default metric?
The default metric value is 1.
Why would you want to redistribute an IGP into BGP?
*> 192.168. 200? The advantage of using redistribution to inject routes into BGP is that internal changes can be advertised with few or no changes to the BGP configuration. If a network is added or removed within the EIGRP domain of AS 200, the change is automatically advertised to Vail.
