What is the cheapest way to cover a pool?

The cheapest way to cover an inground pool is still with a tarp and something like water bags to keep it in place. Most people use water bags, I would highly recommend keeping enough cinder blocks around for the job. Otherwise you will end up with the job of dealing with a slimy box of water bags in the fall.

Can you walk on pool safety covers?

If a pool cover is durable and is installed properly, it can hold a considerable weight and therefore it is enough to be walked on, if necessary. Any openings in the pool cover should be too small for any objects to pass through, and that they are strong enough to resist any attempts to pass through.

What size cover do I need for my pool?

When choosing a cover, you look for them by your pool’s ACTUAL SIZE. The cover that you get will be bigger than your pool by 3 or 4 feet (depending on which cover you order and varies by manufacturer). For example if your pool is 24ft round you would choose that size and choose one of the covers listed on that page.

What size pool cover do I need for a 16×32 inground?

Overall cover measures 18′ x 34′ plus a 4′ x 8′ center step for a 16′ x 32′ inground swimming pool with center end step.

How do I choose a pool cover?

To properly cover and close, your pool cover must be that is the correct size of your pool. For an in-ground pool, according to experts, your pool cover should extend at least 3 inches past the edge of the pool. Prior to purchasing a cover, you will need to measure to find the correct dimensions of your swimming pool.

Will a tarp work as a pool cover?

Polypropylene Tarps Make the Best Pool Covers They do an exceptional job blocking sunlight, which is essential for preventing algae growth when chemicals are not being added regularly. Polypropylene tarps are strong, too, so they can withstand the weight of ice and snow that builds up over the winter.

How much weight can a pool safety cover hold?

485 lbs.
The official standard states, “In the case of a pool with a width or diameter greater than 8 ft. from the periphery, the cover shall be able to hold a weight of 485 lbs. (2 adults and 1 child) to permit a rescue operation.” In certain unusual circumstances, the weight may be even greater.

How does a pool safety cover work?

Safety covers are woven mesh or solid vinyl which secures to your pool deck with straps to anchors. The straps are approximately five feet apart around the entire perimeter of your pool. Safety covers prevent accidental drownings and also provide extra protection for kids, pets, and neighbors.

What size tarp do I need for a 15ft pool?

In the simplest scenario, a pool that has inflatable or rigid plastic walls that stand three feet tall or less, without anything attached or projecting from it, and the entire pool size is approximately 15 square feet, then I would seek a tarp that has 20 square feet.

What is the standard overlap of pool covers?

about 10 to 15 inches
Your pool cover is going to overlap your pool from about 10 to 15 inches. Take the difference in width and length, divide it by two, and mark that point on the ground around your pool’s perimeter.