What gauge wire is used for ear wires?

22-gauge sterling silver half-hard wire would be appropriate for most earwire styles. If you will be hammering your designs, you may want to start with dead-soft wire of a heavier gauge, such as 20-gauge sterling silver dead-soft wire as hammering will harden the wire, making it stiffer as your design develops.

What can I use for earring posts?

Earring posts require a nut or clutch (sold separately) to keep the earring in the ear. jump ring. loop on the other side. Attach one loop to the top of the teardrop.

What can I use as ear weights?

Stick to Professional Ear Weights!

• Hoop weights – that look like an opulent circular bar bell but with more weight that sit through the stretched opening.
• Coil Weights – are similar to hoop weights but rather than a simple opening at the bottom, continue around to create a coil shape.

How thick should ear wires be?

Recommended Earwire Gauge The most common earring wire sizes: 20, 21, and 22 gauge. And if you’re making earwires, I recommend using half-hard wire. If I had to choose one size that would fit most pierced ears, and be compatible with most earring styles – I would pick 21 gauge.

What is the simplest type of earrings?

The Stud Earring As the smallest and simplest of earrings, the stud is comprised of a diamond, gemstone or ornament which appears to float on the front of the earlobe. This is attached to a post that goes through the ear and is attached to a ‘back’ to hold the earring in place.

Why are butterfly back earrings bad?

Friction Backs – Also known as push backs or butterfly backs, these are the most common type. Friction backs use tension to grip the earring post. You slide the earring back onto the earring post until it comfortably touches your earlobe. Cons: As with any spring, they eventually lose their tension and can fall off.