What are miking techniques?
Max McAllister. Stereo miking techniques use two microphones at the same time to record one sound source. Each microphone is then panned to the left and to the right to mimic the way our ears perceive sound in the “real world.” This adds width, space, and location to a recording.
What is blumlein technique used for?
Blumlein pair is the name for a stereo recording technique invented by Alan Blumlein for the creation of recordings that, upon replaying through headphones or loudspeakers, recreate the spatial characteristics of the recorded signal.
What are the four basic miking techniques?
In this section, you’ll find the most common stereo microphone techniques. There are four basic types of stereo microphone techniques: coincident pairs, near-coincident pairs, baffled pairs, and spaced pairs.
What are two stereo miking techniques?
4 Stereo Miking Techniques
- Spaced Pairs. The most basic technique is the spaced pair.
- X-Y Pair: Coincident Pair. In X-Y Pairs, two identical microphones are mounted together in one location one above the other.
- X-Y Pair: Near-coincident Pair. A near-coincident pair will provide more spaciousness.
- Mid-side (MS)
What is stereo miking?
Unlike a single mono microphone, stereo miking gives the listener sound images that correspond to the location of instruments in the recording session. Sounds that were on the left side of the stage are heard predominantly through the left speaker.
What is near coincident miking?
A near-coincident pair is any stereo miking technique that uses a pair of microphones spaced roughly 6-12 inches apart and angled symmetrically on either side of the centre. Near-coincident pairs are often preferred for their stereo image since their mic positions simulate human ears.
How do you record a live percussion?
6 Steps for Recording Drums
- Tune your drum kit. Any recording engineer will tell you that the most important element to a great-sounding recording is a great-sounding instrument.
- Mic the kick drum.
- Mic the snare drum.
- Set up overhead microphones.
- Mic more individual drums (optional).
- Set a preamp and compression sound.
