How do you set the limit on a Somfy motor?

  1. Wake the motor by pressing the UP and DOWN buttons simultaneously until the motor jogs.
  2. Check the direction of rotation with the UP or DOWN button.
  3. Run the motor to the desired upper limit.
  4. Press and hold the MY button until the motor jogs to confirm the limit setting.

How do I set the limit on my somfy blind?

To Change the Upper Limit:

  1. Press UP to send the window covering to its current upper limit.
  2. Press and hold both UP and DOWN simultaneously until the treatment jogs.
  3. Adjust to a new upper limit position.
  4. Press and hold MY/STOP until the treatment jogs to confirm the new limit is set.

What is the My button on Somfy remote?

What is the “My Button”? The “My Button” on Somfy remote controls has two purposes. It is a stop button when the shades are in motion. But for programming purposes, it is what I call a favorite position button.

How do you program a Somfy garage door remote?

Receiver type 1:

  1. Open the cover of the receiver, located next to your motor.
  2. Press the programming button “Prog 1” on the receiver circuit board. The LED L1 lights up.
  3. Press any button on your new transmitter.
  4. Wait 10 seconds.
  5. Your new remote control is successfully programmed.

How do you program a multi channel Somfy remote?

Press and hold the programming button of that transmitter until the shade jogs. Select the transmitter (single channel) or the channel, (1-5) of a multi-channel transmitter, to be added or deleted. Press and hold the programming button of that transmitter until the shade jogs. A jog is a brief up and down motion.

How do you program a somfy awning remote?

Press and hold ‘my’ and up button together until the awning moves in and then release. Use ‘my’ button to keep the awning at the preferred inner limit position. Press and hold ‘my’ until the awning jogs. Lastly, you will find a program button on the back of the remote, press and hold it until the awning jogs.

How do you program a 16 channel Somfy remote?

STEP 1: Press and hold the PROGRAMMING BUTTON on the individual RTS transmitter that has already been programmed until the window coverings jogs: PROGRAMMING MODE is activated for 2 minutes. STEP 2: Use the ARROW buttons or to select the channel on the Telis 16 RTS to be programmed.