How do you remove rear shocks?

Start at the top by pulling it away from the shock mount. Then, push it away from the bottom shock mount. If you have trouble you may need to use a pry bar and mallet to loosen the shock. Do It Right: You may need to compress the shock to remove it from the vehicle.

How long does it take to change rear shocks?

How long does it take to replace rear shocks? It will take about 30 minutes if you’re learning as you go. If you know what you’re doing, it will probably take about 20 minutes.

How long does it take to change a shock absorber?

How long does shock absorber replacement take? We’ve taken a look at some average times across the industry. Whether you’re replacing the front pair or the rear, the time taken is about the same—averaging between 1.5 and 4 hours.

Is it hard to change rear shocks?

The most difficult part of the job is removing the old shocks, which can have a tendency to be really gunky with both age and road-grit, making the bushings and bolts somewhat difficult to remove.

Can I replace shocks myself?

If you need to replace your car’s shock absorbers but don’t want to pay an expensive mechanic’s fee, you can do so on your own with a little effort. Shocks are essential to a car’s performance, giving it a smooth and even ride. Over time, however, the vehicle’s suspensions become worn out.

Do I need an alignment after replacing rear shocks?

In general, you don’t need an alignment done after replacing shocks on a vehicle with the older style front suspension typically found on rear wheel drive vehicles. Replacing those shocks has nothing to do with the alignment whatsoever unless the spring has lost some of it’s tension.

How much does it cost to replace rear shocks?

On average, replacing rear shocks is going to run you somewhere between $1,000 and $1,130. And there is very little wiggle room for those looking for a deal. The parts associated with rear shock replacement come in at right around $900 and make up the bulk of the rear shock replacement cost.

What’s the best way to replace a shock absorber?

Removing the upper shock bolt first makes it easier to slide the shock out from the bottom. Step 2: Remove the lower shock bolt. By having removed the upper shock bolt first, you can now lower the shock out of the bottom of the vehicle. Otherwise, it would drop out if you remove the bottom bolt before the top. Step 3: Install the new shock.

How do you put a new shock on a suspension?

Fit the new shock back onto the suspension control arm. You might need to use some pressure to constrict the shock as it falls into place, and you might need a help to help lift the suspension back up to reinstall the bolts in the correct positions. It can be kind of a balancing act, so it helps to have another set of hands.

How long does it take to replace rear shocks?

How long does it take to replace rear shocks? It will take about 30 minutes if you’re learning as you go. If you know what you’re doing, it will probably take about 20 minutes. Thanks! Is it possible to put shocks in upside down? Yes, it is possible. Look for indicators such as the word “top.”

Where are the shock mounts on a car?

Rear shocks can be accessed from under the vehicle on some vehicles. With others, the top mounts are sometimes accessed from inside the vehicle in areas such as the rear parcel shelf or in the trunk. Verify your shock mounting locations before starting. Step 1: Remove the upper shock bolt.