How do you remove a glove box?

Open the glove box and remove the contents. Remove the limiting arm of the glove box by sliding off the pin. Grasp the front and back of the glove box and squeeze until you can drop down the entire glove box.

What is behind a glove box?

The cabin air filter is located within the dashboard, behind the vehicle’s glove box. Open the vehicle’s glove box, and remove any paperwork or items that may be there to prevent from falling out when the glove box is removed.

How often should I change my cabin air filter?

about every 30,000 miles
When Should You Change the Cabin Air Filter? Cabin Air Filters should be changed about every 30,000 miles. But, it’s always best to consult your owner’s manual for your recommended vehicle maintenance needs to have your air filter changed.

How do you open a glove box to replace the filter?

Release the glove box. Grasp the front and back of the glove box, squeezing them toward each other until the side clamps pop free. Now that the sides are free, you can drop down the entire glove box, so you can see the faceplate to the cabin air filter channel.

How do I get my glove box out of my car?

Open the glove box and unscrew the 4 screws that hold the glove box in place using a Torx bit screwdriver. Press in on the plastic clips at the top of the inside of the glove box. Slide the glove box up and out of the dash.

How do you lock a new Mercedes glove box?

When purchasing a new glove box, you may also need a separate lock key (depending on the year of your Mercedes) to lock the new glove box as it may have a difference lock that the factory box. Open the glove box and unscrew the 4 screws that hold the glove box in place using a Torx bit screwdriver.

What can I do if my glove box lock is defective?

To replace a defective lock or retrieve your items, you have to gain access to the glove box. A simple remedy exists to remove the glove box door without endangering the appearance or function of interior components.

How can I get Into my glove box?

Remove or displace any under-dash trim panels to gain access to the screws that attach the glove box door hinge to the dashboard. Remove the glove box door hinge attaching screws. Gently pry the glove box door hinge away from the dashboard. Insert your hand into the glove box with the palm side facing the door and disengage the locking mechanism.