How do you remove a door panel from an Alero?
Lift the door panel upward off the door frame a few inches. Reach behind and then disconnect any wire harness connections to the window control module and powered side-view mirrors, if applicable. Remove the door panel from the Alero and set it aside in a safe area where no damage will occur to it.
How do you remove the reflector from a door frame?
Pry the red reflector cover off the outside edge of the door panel using the trim panel tool to unsnap it from the door panel. Remove the retaining screw from the door panel that is now revealed by the removal of the reflector cover. Use the angled trim panel tool to unsnap the retaining pins that secure the door panel to the door frame.
How do you remove trim from interior door?
Remove the plastic trim panel near the door handle from the interior door panel using an angled trim tool to unseat it from the door panel. Remove the two retaining screws revealed after the removal of the trim panel using the Phillips screwdriver.
How do you remove a door panel from a car?
Insert a screwdriver into the edge of the armrest cover and pry it off. The armrest cover may be concealing a fastening screw. Take a flathead screwdriver and wedge it into the crack at the edge of the panel. Apply gentle pressure to pop it out and remove it.
How do you remove the interior door panel?
Most interior car panels have a relatively universal removal procedure, but they all vary slightly. Open the door containing the panel you wish to remove and roll the window all the way down. Locate and remove the three retaining screws on the bottom of the interior door panel with the Phillips head screwdriver.
How to remove the inside door panel on a Chevrolet Aveo?
The South Korean GM Daewoo Company designed, manufactured and exported the model to the U.S. and other countries. Most interior car panels have a relatively universal removal procedure, but they all vary slightly. Open the door containing the panel you wish to remove and roll the window all the way down.
How do you remove the side view mirror on a Chevy Aveo?
For power windows, pry the window control module off of the arm rest with the interior pry tool and unplug the wire harness connections beneath it. Check for another retaining screw under the window control module. Remove the triangular black molding covering the side-view mirror by gently prying it off with the interior panel pry tool.
How to remove the door panel on a Mercedes?
You will need a set of Torx sockets. To remove the door panel, you will need your screwdrivers, trim plastic wedge but also must have Torx Bit Socket Set if you need to take any other componenet off the door. Using a plastic wedge pull out the outside mirror plastic cover. It is held in place with clips, no screws need to be removed.
