How do you get grease out of a grease gun?

On the end of the barrel where the cartridge is held, opposite the nozzle, you should see a plunger rod that’s used to push on the cartridge and force the grease out. Continue to pull until the plunger rod is withdrawn fully from the barrel. On some grease guns, pulling back should make the cartridge eject automatically.

What happens when you pull the cartridge out of a grease gun?

On some grease guns, pulling back should make the cartridge eject automatically. Depending on how much gunk is built up on the inside, it may come out all or halfway. Before you remove it, though, you need to secure the rod in place. Secure the piston rod and remove the cartridge.

How do you load a reservoir grease gun?

Loading a Reservoir Grease Gun Separate the grease gun head from the barrel. Insert the open end of the barrel into a container of grease. Remove the barrel from the grease. Reattach the barrel of the grease gun to the head of the grease gun. Test the dispensing of the grease.

Where does the piston go on a grease gun?

On some grease guns, the retracted piston rod will latch into the fully retracted position, and a release tab is provided on the end of the barrel to allow the piston rod to move again. When you’ve secured the rod in place, you can pull the empty cartridge loose and discard it.

What is the proper way to load a grease gun?

Hold the grease gun barrel directly over the grease. Push the tip of the barrel into the grease so that it forms a suction vacuum. Pull back on the plunger and suck up enough grease to load the barrel.Re-Assemble the Grease GunPull the barrel out from the grease once it is full, twisting it sideways to break the grease off from the tub surface.

How do you load a cartridge grease gun?

How to Load a Grease Gun Cartridge. 1). Unscrew the head of the grease gun from the barrel by twisting it counterclockwise. 2). Pull out on the spring-loaded rod handle at the bottom of the gun and lock the notch in the rod into the detent at the base of the barrel. 3). Remove the old cartridge by pulling it out through the top of the barrel.

How do you change a grease gun cartridge?

Changing a Grease Cartridge. You can also refill your grease gun using a new cartridge of grease. First, unscrew the cylinder one turn to make it easier to pull back on the plunger. Pull the plunger all the way back and lock it into place by tilting it towards the metal tab. Now finish unscrewing the cylinder.

Do you know how does a grease gun work?

With a hand pump grease gun, the user works the piston lever of the tool in order to create pressure (much like with a traditional hand pump). A separate grease gun trigger is then pulled to release this pressure as a flow of lubricant when it has reached the desired level. This means that greater force can be built up and exerted than would be