How do you fix a timer on a Dualit toaster?
Just unscrew the base plate, pull off the knob, undo the screws holding the timer, replace the timer and re-do the screws and you’ve done. BUT DO MAKE SURE YOU UNPLUG THE TOASTER FIRST!
Why is my Dualit toaster not working?
The toaster may have tripped the Residual-Current Device (RCD). Some crumbs or pieces of bread may be stuck in the toaster. Unplug, and allow to cool. Remove the crumb tray then turn the toaster upside down over a bin and gently shake the crumbs out.
Why does my Dualit toaster only toast on one side?
Why is one side of my bread not working? Check the ‘selector’ switch is set correctly. If set to Bagel setting only one side will toast and remember to insert bread from the very left hand slot. One or more of the elements may need replacing, call the helpline or visit for replacements.
Are Dualit toasters worth the money?
Aside from all the techy stuff, it’s worth noting that with the Dualit you’ll get a very even, consistent toast across all types of breads, partly because its filaments heat at a slightly lower, more controlled heat than other toasters. There are also four-slice and six-slice options available.
Are Dualit toasters made in China?
Response direct from Dualit:the only toasters that are not manufactured in China are the Dualit Claasic range, Newgen and Vario, these are manufactured in the UK, but the soft touch is now discontinued and replaced with the High Gloss. Only the 2 slot Lite toaster is manufactured in China.
Should Dualit toaster elements glow red?
Should the elements glow red? Our unique ‘ProHeat’ elements, used on all Vario, Combi and NewGen toasters, only glow red after prolonged and continuous use. If they start to glow red straight after being switched on, there could well be a fault with the elements.
