How do I connect my Lorex wireless camera?

  1. Connect the camera to a power outlet and place the monitor within 1ft (30cm) of the camera.
  2. Tap the Menu icon ( ) and use the joystick to select Camera > Pairing.
  3. Select a channel to pair the camera with.
  4. When the screen prompts press the Pair button on the camera before the timer finishes counting down.

How do I set up my Lorex DVR?

In your web browser, enter to access the log in page. Enter your Username and Password to log in to your account. ), and click Set up a new DDNS. Enter a Device Name of your choice, the MAC Address, and the URL Request of your choice.

Why is my Lorex camera not pairing?

If your wireless camera is not pairing with the Wireless Home Monitor, there may an issue with the power source, the distance between your cameras and monitor, or wireless interference.

How do you pair a camera?

Connecting to the Camera from an Android Device (Bluetooth)

  1. Select PAIRING REGISTRATION in the camera menus.
  2. Tap PAIRING REGISTRATION.
  3. Tap OK when pairing is complete.

Why won’t my phone connect to my Lorex cameras?

If the Lorex Cirrus app is not connecting to your cameras, it may be due to a pending firmware update on your recorder: If installing new firmware does not resolve the issue and you are using an Android device: Please see the instructions below for clearing the app’s data.

How do you set up a security camera system?

How to set up a smart home security camera

  1. Download the appropriate app on your phone.
  2. Create an account if you don’t have one already.
  3. Connect the power supply to the camera and wait for it to be ready to set up.
  4. Use the ‘add camera’ option in the app and follow the instructions.

How do I reset my Lorex wireless camera?

To reset the IP camera to default settings:

  1. Ensure that the camera is connected to the NVR via an Ethernet cable.
  2. Press and hold the Reset button on the back or base of the camera.
  3. While still holding the Reset button, disconnect and reconnect the Ethernet cable.
  4. The camera will reset to defaults and then restart.