How do I connect my iPhone to GeoVision?

Geovision iPhone Setup

  1. Click the Network button and select WebCam Server.
  2. Click the JPG tab, and select Create JPEG/GIF file(s).
  3. Click the Mobile tab and activate the settings of communication ports.
  4. Click OK to start the WebCam server.

How do I reset my GeoVision IP camera?

Press and hold the default button for 8 seconds. 4. Release the default button. When the process of loading default settings is completed, the camera reboots automatically.

Are GeoVision cameras Onvif compatible?

All series of GeoVision IP cameras now support ONVIF, which has extended GeoVision’s integration to 3rd-party NVR/VMS. With the release of firmware v2. 0, all series of GeoVision IP cameras are now ONVIF conformant. The implementation to ONVIF is in addition to its current support to RTSP and PSIA protocols.

How do I reset my GV ebd4700?

You can restore the camera to factory default settings using the Web interface.

  1. At the top, click Setup.
  2. In the left menu, select System and select Maintenance.
  3. Under the Config Management section, click the Default button.

How do I access geovision remotely?

Enter the Login ID and Password that you set up for remote authentication on the Geovision DVR. Check the save password checkbox. Then, click the Login button as seen below. The remote viewer will connect and you should see video from your security cameras like the below screenshot.

How do you play a geovision video?

Geovision Surveillance DVR Video Search & Playback

  1. Make sure the GV-System is open and running.
  2. Now select the camera that you wish to view.
  3. Then select a date folder from the date tree.
  4. Choose a time from the Video Events list.
  5. Now click the button to begin the video playback. (

How do I download a video from geovision?

Geovision Surveillance DVR Video Export & Playback

  1. Insert a USB thumb drive into the USB drive of the Geovision Surveillance DVR.
  2. Then on the main screen of the GV-System, click the button.
  3. Now click the button on the functional panel.
  4. Select Using Hard Disk to export the files to the USB device.